Manager and manually install your device's drivers. To open the Device Manager, move your mouse to the lower left corner, over the Start Menu charm. Right click your mouse. A menu will appear. Choose Device Manager. With the Device Manager opened and your NoLand device connected, locate the connected device. It will most likely be in the. Engineering Software to send and receive network messages using J2534-1 (December 2004) API, C# Version 1.0.14 RP1210: RP1210A DLL for use with existing Heavy Truck RP1210 applications for CarDAQ-Plus and CarDAQ-M only. TVIT driver above includes RP1210 drivers. DLL Discovery: Sample registry code for PassThru DLL Discovery. Plug the USB cable into a USB port on your PC. The computer should immediately detect your device. When the computer recognizes a USB device, the LED on the device blinks. Allow the device to warm up for the time period recommended in the device specifications (typically 15 minutes) before you continue configuring the software for your device. Download PC Drivers - Windows 10, Windows 8, Windows 7, XP and Vista Drivers - Help and Fixes for Driver Updates and Windows and Mac Errors and Support. Download Extron software, control drivers, firmware, HID modules, architectural design resources, GUI design resources, TouchLink touchpanel themes, and more.
USB Interface Drivers: Arduino/YourDuino Nano
Most Nano boards use FTDI chips for USB interface. This uses the same FTDI drivers supplied with Arduino IDE. See it here:
Download Noland Engineering Port Devices Driver
However some use the WCH type CH340G chip and require a different driver. They are usually lower cost.
If you have this type of Nano, the USB chip on the underside of the board will be long and narrow, and marked WCH CH340G. See it HERE:
You need to install a different USB driver for these. Use the following procedure:
Download the driver software HERE:
(Your system may not allow downloading .EXE files, so click on this ZIP version): Navman nz port devices driver ed.
You need Winzip or other utility to extract the EXE from the ZIP.
Download gadmei driver. Before connecting the Nano to your USB port: Open “ch341ser.exe” file and run it.The software extracts about 8 files.
The software asks whether it can install the CH341SER.INF driver for the CH340 chip (Version 11/04/2011, 3.3.2011.11).
Click INSTALL Huahong driver download for windows 10 32-bit.
A Windows message asks whether the driver has installed correctly. Click YES.
Connect your Nano.
Download Noland Engineering Port Devices Driver Download
From Control Panel, open Device Manager and Ports. If installed correctly you should see an entry “USB-SERIAL CH340 (COMXX)
In the Arduino IDE, go to: Tools>Board (Select Nano)Tools>Port (Select the com port number found in Device Manager)<
Test by uploading File>Examples>Basics>Blink MAC Version: As always, It's Complicated. See the site HERE:
